dmesg - Optane Read
Linux version 4.10.0-22-generic (buildd@lcy01-08) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #24-Ubuntu SMP Mon May 22 17:43:20 UTC 2017 (Ubuntu 4.10.0-22.24-generic 4.10.15)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000656b5fff] usable
BIOS-e820: [mem 0x00000000656b6000-0x00000000656b6fff] ACPI NVS
BIOS-e820: [mem 0x00000000656b7000-0x00000000656b7fff] reserved
BIOS-e820: [mem 0x00000000656b8000-0x000000006b693fff] usable
BIOS-e820: [mem 0x000000006b694000-0x000000006c18dfff] reserved
BIOS-e820: [mem 0x000000006c18e000-0x000000006c23afff] usable
BIOS-e820: [mem 0x000000006c23b000-0x000000006c60dfff] ACPI NVS
BIOS-e820: [mem 0x000000006c60e000-0x000000006d39dfff] reserved
BIOS-e820: [mem 0x000000006d39e000-0x000000006d3fefff] type 20
BIOS-e820: [mem 0x000000006d3ff000-0x000000006d3fffff] usable
BIOS-e820: [mem 0x000000006d400000-0x000000006fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000108effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.50 by American Megatrends
efi: ACPI 2.0=0x6c23b000 ACPI=0x6c23b000 SMBIOS=0x6d2ef000 SMBIOS 3.0=0x6d2ee000 ESRT=0x6a1679d8
SMBIOS 3.0.0 present.
DMI: EVGA INTERNATIONAL CO.,LTD Default string/134-KS-E279, BIOS 1.03 04/20/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x108f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0070000000 mask 7FF0000000 uncachable
2 base 006E000000 mask 7FFE000000 uncachable
3 base 006D800000 mask 7FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x6d400 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000006a1679d8 to 0x000000006a167a10.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff93b640097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x1b0628000, 0x1b0628fff] PGTABLE
BRK [0x1b0629000, 0x1b0629fff] PGTABLE
BRK [0x1b062a000, 0x1b062afff] PGTABLE
BRK [0x1b062b000, 0x1b062bfff] PGTABLE
BRK [0x1b062c000, 0x1b062cfff] PGTABLE
BRK [0x1b062d000, 0x1b062dfff] PGTABLE
BRK [0x1b062e000, 0x1b062efff] PGTABLE
BRK [0x1b062f000, 0x1b062ffff] PGTABLE
BRK [0x1b0630000, 0x1b0630fff] PGTABLE
BRK [0x1b0631000, 0x1b0631fff] PGTABLE
BRK [0x1b0632000, 0x1b0632fff] PGTABLE
RAMDISK: [mem 0x32e01000-0x356f7fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000006C23B000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000006C23B0B0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000006C2627D0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000006C23B220 0275B0 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000006C60DC40 000040
ACPI: APIC 0x000000006C2628E8 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000006C2629A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000006C2629F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000006C262A30 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x000000006C262DF0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000006C262E90 003159 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000006C265FF0 0026AE (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000006C2686A0 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000006C2686D8 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000006C2694C0 000A2F (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000006C269EF0 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x000000006C269F38 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000006C26AE18 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: WSMT 0x000000006C26AEB0 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000006C26AED8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000006C26B178 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000006C26E180 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000006C26E1B8 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x000000006C26E210 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x000000006C26E248 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: ASF! 0x000000006C26E338 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000108effffff]
NODE_DATA(0) allocated [mem 0x108efd5000-0x108effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000108effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000656b5fff]
node 0: [mem 0x00000000656b8000-0x000000006b693fff]
node 0: [mem 0x000000006c18e000-0x000000006c23afff]
node 0: [mem 0x000000006d3ff000-0x000000006d3fffff]
node 0: [mem 0x0000000100000000-0x000000108effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000108effffff]
On node 0 totalpages: 16754396
DMA zone: 64 pages used for memmap
DMA zone: 23 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 6813 pages used for memmap
DMA32 zone: 436032 pages, LIFO batch:31
Normal zone: 254912 pages used for memmap
Normal zone: 16314368 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0x656b6000-0x656b6fff]
PM: Registered nosave memory: [mem 0x656b7000-0x656b7fff]
PM: Registered nosave memory: [mem 0x6b694000-0x6c18dfff]
PM: Registered nosave memory: [mem 0x6c23b000-0x6c60dfff]
PM: Registered nosave memory: [mem 0x6c60e000-0x6d39dfff]
PM: Registered nosave memory: [mem 0x6d39e000-0x6d3fefff]
PM: Registered nosave memory: [mem 0x6d400000-0x6fffffff]
PM: Registered nosave memory: [mem 0x70000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x70000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff93c6cec00000 s107992 r8192 d31272 u262144
pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16492584
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65721176K/67017584K available (9082K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 1296408K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:2048 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 4200.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8400.00 BogoMIPS (lpj=16800000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K
ftrace: allocating 34178 entries in 134 pages
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000006bae2000 end: 0x0000006bb01fff
DMAR: RMRR base: 0x0000006d800000 end: 0x0000006fffffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (67200.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x656b6000-0x656b6fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x6c23b000-0x6c60dfff] (4009984 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:57:34, date: 06/15/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 36 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93C6872A8000 00081F (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93C6871A8000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93C6876AD800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93C6872A4C00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x70000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:5912] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x70000000-0x7fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdd130000-0xdd13ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdd150000-0xdd150fff 64bit]
pci 0000:00:15.0: [8086:a2e0] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xdd14f000-0xdd14ffff 64bit]
pci 0000:00:15.1: [8086:a2e1] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xdd14e000-0xdd14efff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdd14d000-0xdd14dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdd148000-0xdd149fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdd14c000-0xdd14c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdd14b000-0xdd14b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:a292] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:a297] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a29a] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.4: [8086:a29c] type 01 class 0x060400
pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.4: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a2c5] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdd144000-0xdd147fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdd140000-0xdd143fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdd120000-0xdd12ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdd14a000-0xdd14a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdd100000-0xdd11ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:1b00] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdd000000-0xdd07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:10ef] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdd080000-0xdd083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdd0fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:02:00.0: [8086:2522] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0xdda10000-0xdda13fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xdda00000-0xdda0ffff 64bit]
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [mem 0xdda00000-0xddafffff]
pci 0000:03:00.0: [8086:f1a5] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xdd900000-0xdd903fff 64bit]
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1b.4: PCI bridge to [bus 03]
pci 0000:00:1b.4: bridge window [mem 0xdd900000-0xdd9fffff]
pci 0000:04:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xdd800000-0xdd807fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [mem 0xdd800000-0xdd8fffff]
pci 0000:05:00.0: [1969:e0b1] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xdd700000-0xdd73ffff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xdd700000-0xdd7fffff]
pci 0000:06:00.0: [1912:0015] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xdd600000-0xdd601fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xdd600000-0xdd6fffff]
pci 0000:07:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xdd500000-0xdd507fff 64bit]
pci 0000:07:00.0: PME# supported from D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 07]
pci 0000:00:1c.6: bridge window [mem 0xdd500000-0xdd5fffff]
pci 0000:08:00.0: [168c:003e] type 00 class 0x028000
pci 0000:08:00.0: reg 0x10: [mem 0xdd200000-0xdd3fffff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7: bridge window [mem 0xdd200000-0xdd3fffff]
pci 0000:09:00.0: [1b4b:9235] type 00 class 0x010601
pci 0000:09:00.0: reg 0x10: [io 0xc050-0xc057]
pci 0000:09:00.0: reg 0x14: [io 0xc040-0xc043]
pci 0000:09:00.0: reg 0x18: [io 0xc030-0xc037]
pci 0000:09:00.0: reg 0x1c: [io 0xc020-0xc023]
pci 0000:09:00.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:09:00.0: reg 0x24: [mem 0xdd410000-0xdd4107ff]
pci 0000:09:00.0: reg 0x30: [mem 0xdd400000-0xdd40ffff pref]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 09]
pci 0000:00:1d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1d.0: bridge window [mem 0xdd400000-0xdd4fffff]
pci 0000:00:1d.4: PCI bridge to [bus 0a-42]
pci 0000:00:1d.4: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:00:1d.4: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x656b6000-0x67ffffff]
e820: reserve RAM buffer [mem 0x6b694000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6c23b000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6d400000-0x6fffffff]
e820: reserve RAM buffer [mem 0x108f000000-0x108fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0xff00-0xfffe] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1d.4: bridge window [io 0x1000-0x0fff] to [bus 0a-42] add_size 1000
pci 0000:00:1d.4: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1d.4: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1d.4: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdd0fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [mem 0xdda00000-0xddafffff]
pci 0000:00:1b.4: PCI bridge to [bus 03]
pci 0000:00:1b.4: bridge window [mem 0xdd900000-0xdd9fffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [mem 0xdd800000-0xdd8fffff]
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xdd700000-0xdd7fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xdd600000-0xdd6fffff]
pci 0000:00:1c.6: PCI bridge to [bus 07]
pci 0000:00:1c.6: bridge window [mem 0xdd500000-0xdd5fffff]
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7: bridge window [mem 0xdd200000-0xdd3fffff]
pci 0000:00:1d.0: PCI bridge to [bus 09]
pci 0000:00:1d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1d.0: bridge window [mem 0xdd400000-0xdd4fffff]
pci 0000:00:1d.4: PCI bridge to [bus 0a-42]
pci 0000:00:1d.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1d.4: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:00:1d.4: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x70000000-0xdfffffff window]
pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xdda00000-0xddafffff]
pci_bus 0000:03: resource 1 [mem 0xdd900000-0xdd9fffff]
pci_bus 0000:04: resource 1 [mem 0xdd800000-0xdd8fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xdd700000-0xdd7fffff]
pci_bus 0000:06: resource 1 [mem 0xdd600000-0xdd6fffff]
pci_bus 0000:07: resource 1 [mem 0xdd500000-0xdd5fffff]
pci_bus 0000:08: resource 1 [mem 0xdd200000-0xdd3fffff]
pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:09: resource 1 [mem 0xdd400000-0xdd4fffff]
pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0a: resource 1 [mem 0xc4000000-0xda0fffff]
pci_bus 0000:0a: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 41948K
DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:7b" under DMAR at fed91000 as 00:15.1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x601c7000-0x641c7000] (64MB) mapped at [ffff93b6a01c7000-ffff93b6a41c6fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c8a615336c, max_idle_ns: 440795257976 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1497542254.588:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-22-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-22-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-22-generic xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.0-22-generic xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: hcc params 0x014050cf hci version 0x100 quirks 0x00000090
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.10.0-22-generic xhci-hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.10.0-22-generic xhci-hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:07:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.10.0-22-generic xhci-hcd
usb usb7: SerialNumber: 0000:07:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 8
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.10.0-22-generic xhci-hcd
usb usb8: SerialNumber: 0000:07:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
usb 1-3: new full-speed USB device number 2 using xhci_hcd
usb 1-3: New USB device found, idVendor=0cf3, idProduct=e301
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-5: New USB device found, idVendor=05e3, idProduct=0612
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-5: Product: USB3.0 Hub
usb 2-5: Manufacturer: GenesysLogic
hub 2-5:1.0: USB hub found
hub 2-5:1.0: 4 ports detected
usb 1-4: new full-speed USB device number 3 using xhci_hcd
i8042: No controller found
clocksource: Switched to clocksource tsc
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
usb 1-4: New USB device found, idVendor=1532, idProduct=0203
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Razer BlackWidow Chroma
usb 1-4: Manufacturer: Razer
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x906e9, pf=0x2, revision=0x48
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: a167cdd0c8d1eea96632c95731fa483a527957b7'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 5:161:993
machinecheck machinecheck6: hash matches
rtc_cmos 00:02: setting system clock to 2017-06-15 15:57:36 UTC (1497542256)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1144K
Freeing unused kernel memory: 280K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device13
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
wmi: Mapper loaded
hidraw: raw HID events driver (C) Jiri Kosina
ahci 0000:00:17.0: version 3.0
alx 0000:05:00.0: enabling device (0000 -> 0002)
[drm] Initialized
nvme nvme0: pci function 0000:02:00.0
nvme nvme1: pci function 0000:03:00.0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
alx 0000:05:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [00:1f:bc:12:01:d5]
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
alx 0000:05:00.0 enp5s0: renamed from eth0
MXM: GUID detected in BIOS
checking generic (b0000000 300000) vs hw (b0000000 10000000)
fb: switching to nouveaufb from EFI VGA
Console: switching to colour dummy device 80x25
nouveau 0000:01:00.0: NVIDIA GP102 (132000a1)
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xdd14b000 port 0xdd14b100 irq 340
ata2: SATA max UDMA/133 abar m2048@0xdd14b000 port 0xdd14b180 irq 340
e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ahci 0000:09:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata3: SATA max UDMA/133 abar m2048@0xdd410000 port 0xdd410100 irq 344
ata4: SATA max UDMA/133 abar m2048@0xdd410000 port 0xdd410180 irq 344
ata5: SATA max UDMA/133 abar m2048@0xdd410000 port 0xdd410200 irq 344
ata6: SATA max UDMA/133 abar m2048@0xdd410000 port 0xdd410280 irq 344
usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 1-5: new high-speed USB device number 4 using xhci_hcd
usb 6-2: New USB device found, idVendor=05dc, idProduct=a838
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2: Product: USB Flash Drive
usb 6-2: Manufacturer: Lexar
usb 6-2: SerialNumber: AA51QW9H7BYBLO4Y
usb-storage 6-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 6-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
nouveau 0000:01:00.0: bios: version 86.02.15.00.01
nouveau 0000:01:00.0: bios: M0203E type 08
nouveau 0000:01:00.0: fb: 12288 MiB of unknown memory type
nouveau 0000:01:00.0: priv: HUB0: 00d054 00000007 (18408216)
[TTM] Zone kernel: Available graphics memory: 32941118 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 12288 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: BIT table 'A' not found
nouveau 0000:01:00.0: DRM: BIT table 'L' not found
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.1
nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f42 04620030
nouveau 0000:01:00.0: DRM: DCB outp 01: 04811f96 04600020
nouveau 0000:01:00.0: DRM: DCB outp 02: 04011f92 00020020
nouveau 0000:01:00.0: DRM: DCB outp 03: 04822f86 04600010
nouveau 0000:01:00.0: DRM: DCB outp 04: 04022f82 04620010
nouveau 0000:01:00.0: DRM: DCB outp 06: 02033f62 04620020
nouveau 0000:01:00.0: DRM: DCB outp 07: 02844f76 04600010
nouveau 0000:01:00.0: DRM: DCB outp 08: 02044f72 00020010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
nouveau 0000:01:00.0: DRM: DCB conn 01: 02000146
nouveau 0000:01:00.0: DRM: DCB conn 02: 01000246
nouveau 0000:01:00.0: DRM: DCB conn 03: 00020361
nouveau 0000:01:00.0: DRM: DCB conn 04: 00010446
nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
usb 1-5: New USB device found, idVendor=05e3, idProduct=0608
usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-5: Product: USB2.0 Hub
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
nvme1n1: p1 p2 p3 p4
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nvme0n1: p1 p2
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
usb 1-7: new full-speed USB device number 5 using xhci_hcd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:bc:12:01:d4
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
i915 0000:00:02.0: enabling device (0000 -> 0003)
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[drm] Memory usable by graphics device = 4096M
[drm] Replacing VGA console driver
ata4: SATA link down (SStatus 0 SControl 300)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
ata3: SATA link down (SStatus 0 SControl 300)
[drm] Finished loading i915/kbl_dmc_ver1_01.bin (v1.1)
nouveau 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22
random: fast init done
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-7: New USB device found, idVendor=1532, idProduct=0044
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: Razer Mamba
usb 1-7: Manufacturer: Razer
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-10: WDC WD1003FZEX-00K3CA0, 01.01A01, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-7: ST3500320AS, SD04, max UDMA/133
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST3500320AS SD04 PQ: 0 ANSI: 5
nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ffff93c67dd05000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
usb 1-5.2: new full-speed USB device number 6 using xhci_hcd
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5
[drm] failed to retrieve link info, disabling eDP
[drm] GuC firmware load skipped
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 1
usb 1-5.2: New USB device found, idVendor=1b1c, idProduct=0c04
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: Integrated USB Bridge
usb 1-5.2: Manufacturer: Corsair Memory, Inc.
[drm] Cannot find any crtc or sizes - going 1024x768
i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdc] 4096-byte physical blocks
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 5:0:0:0: [sdc] Attached SCSI removable disk
usb 1-8: new high-speed USB device number 7 using xhci_hcd
usb 1-8: New USB device found, idVendor=05e3, idProduct=0610
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: USB2.0 Hub
usb 1-8: Manufacturer: GenesysLogic
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 4 ports detected
usb 6-1: new SuperSpeed USB device number 3 using xhci_hcd
usb 6-1: New USB device found, idVendor=054c, idProduct=09c2
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: Storage Media
usb 6-1: Manufacturer: Sony
usb 6-1: SerialNumber: 5C07105BFB08156A85
usb-storage 6-1:1.0: USB Mass Storage device detected
scsi host7: usb-storage 6-1:1.0
usb 1-5.3: new high-speed USB device number 8 using xhci_hcd
usb 1-5.3: New USB device found, idVendor=050d, idProduct=0414
usb 1-5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5.3:1.0: USB hub found
hub 1-5.3:1.0: 4 ports detected
usb 1-9: new high-speed USB device number 9 using xhci_hcd
scsi 6:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdd] 125038592 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 6:0:0:0: [sdd] Attached SCSI removable disk
usb 1-9: New USB device found, idVendor=041e, idProduct=323a
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: Product: Sound Blaster X7
usb 1-9: Manufacturer: Creative Technology Ltd
usb 1-9: SerialNumber: 000000Qp
usb 1-5.4: new full-speed USB device number 10 using xhci_hcd
usb 1-5.4: New USB device found, idVendor=0a5c, idProduct=4500
usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.4: Product: BCM2046B1
usb 1-5.4: Manufacturer: Broadcom
hub 1-5.4:1.0: USB hub found
hub 1-5.4:1.0: 3 ports detected
usb 1-8.3: new full-speed USB device number 11 using xhci_hcd
[drm] RC6 on
usb 1-8.3: New USB device found, idVendor=3842, idProduct=2001
usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8.3: Product: USB Keyboard
usb 1-8.3: Manufacturer: EVGA
usb 1-5.3.2: new full-speed USB device number 12 using xhci_hcd
usb 1-5.3.2: New USB device found, idVendor=28de, idProduct=1142
usb 1-5.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.3.2: Product: Steam Controller
usb 1-5.3.2: Manufacturer: Valve Software
scsi 7:0:0:0: Direct-Access Sony Storage Media PMAP PQ: 0 ANSI: 6
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 7:0:0:0: [sde] 121405440 512-byte logical blocks: (62.2 GB/57.9 GiB)
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 45 00 00 00
sd 7:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
usb 1-12: new high-speed USB device number 13 using xhci_hcd
sde: sde1
sd 7:0:0:0: [sde] Attached SCSI removable disk
usb 1-12: New USB device found, idVendor=05e3, idProduct=0608
usb 1-12: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-12: Product: USB2.0 Hub
hub 1-12:1.0: USB hub found
hub 1-12:1.0: 4 ports detected
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer BlackWidow Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:1532:0203.0001/input/input4
hid-generic 0003:1532:0203.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow Chroma] on usb-0000:00:14.0-4/input0
input: Razer Razer BlackWidow Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:1532:0203.0002/input/input5
usb 1-5.4.1: new full-speed USB device number 14 using xhci_hcd
hid-generic 0003:1532:0203.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow Chroma] on usb-0000:00:14.0-4/input1
input: Razer Razer BlackWidow Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:1532:0203.0003/input/input6
hid-generic 0003:1532:0203.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow Chroma] on usb-0000:00:14.0-4/input2
input: Razer Razer Mamba as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1532:0044.0004/input/input7
hid-generic 0003:1532:0044.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer Mamba] on usb-0000:00:14.0-7/input0
input: Razer Razer Mamba as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:1532:0044.0005/input/input8
usb 1-5.4.1: New USB device found, idVendor=0a5c, idProduct=4502
usb 1-5.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4.1/1-5.4.1:1.0/0003:0A5C:4502.0010/input/input9
hid-generic 0003:1532:0044.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer Mamba] on usb-0000:00:14.0-7/input1
input: Razer Razer Mamba as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:1532:0044.0006/input/input10
hid-generic 0003:0A5C:4502.0010: input,hidraw5: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:14.0-5.4.1/input0
usb 1-5.3.3: new full-speed USB device number 15 using xhci_hcd
hid-generic 0003:1532:0044.0006: input,hidraw6: USB HID v1.11 Keyboard [Razer Razer Mamba] on usb-0000:00:14.0-7/input2
hid-generic 0003:1B1C:0C04.0007: hiddev0,hidraw7: USB HID v1.11 Device [Corsair Memory, Inc. Integrated USB Bridge] on usb-0000:00:14.0-5.2/input0
input: Creative Technology Ltd Sound Blaster X7 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.4/0003:041E:323A.0008/input/input11
usb 1-5.3.3: New USB device found, idVendor=298d, idProduct=1010
usb 1-5.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.3.3: Product: NB-1010-U
usb 1-5.3.3: Manufacturer: NEXT Biometrics
hid-generic 0003:041E:323A.0008: input,hidraw8: USB HID v1.11 Device [Creative Technology Ltd Sound Blaster X7] on usb-0000:00:14.0-9/input4
input: EVGA USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.3/1-8.3:1.0/0003:3842:2001.0009/input/input12
usb 1-5.4.2: new full-speed USB device number 16 using xhci_hcd
hid-generic 0003:3842:2001.0009: input,hidraw9: USB HID v1.11 Keyboard [EVGA USB Keyboard] on usb-0000:00:14.0-8.3/input0
input: EVGA USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.3/1-8.3:1.1/0003:3842:2001.000A/input/input13
hid-generic 0003:3842:2001.000A: input,hiddev0,hidraw10: USB HID v1.11 Device [EVGA USB Keyboard] on usb-0000:00:14.0-8.3/input1
input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3.2/1-5.3.2:1.0/0003:28DE:1142.000B/input/input14
usb 1-5.4.2: New USB device found, idVendor=0a5c, idProduct=4503
usb 1-5.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4.2/1-5.4.2:1.0/0003:0A5C:4503.0011/input/input15
hid-generic 0003:28DE:1142.000B: input,hidraw11: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:14.0-5.3.2/input0
hid-generic 0003:0A5C:4503.0011: input,hidraw12: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:14.0-5.4.2/input0
hid-generic 0003:28DE:1142.000C: hiddev0,hidraw13: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-5.3.2/input1
hid-generic 0003:28DE:1142.000D: hiddev0,hidraw14: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-5.3.2/input2
hid-generic 0003:28DE:1142.000E: hiddev0,hidraw15: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-5.3.2/input3
hid-generic 0003:28DE:1142.000F: hiddev0,hidraw16: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-5.3.2/input4
usb 1-5.4.3: new full-speed USB device number 17 using xhci_hcd
usb 1-5.4.3: New USB device found, idVendor=050d, idProduct=016a
usb 1-5.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.4.3: Product: BLUETOOTH USB +EDR ADAPTER v2.1 UHE
usb 1-5.4.3: Manufacturer: Broadcom Corp
usb 1-5.4.3: SerialNumber: 00190E0DA26C
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Remote File Systems.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd-journald[316]: Received request to flush runtime journal from PID 1
Adding 1320616k swap on /swapfile. Priority:-1 extents:5 across:1353384k SSFS
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new interface driver btusb
usb 1-5.4.1: input irq status -75 received
usb 1-5.4.1: input irq status -75 received
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
idma64 idma64.0: Found Intel integrated DMA 64-bit
usb 1-5.4.1: input irq status -75 received
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x602, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 6 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x702, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 7 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x804, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 8 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x904, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 9 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0xa01, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 10 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0xb02, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 11 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0xc03, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 12 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0xd05, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 13 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0xe01, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 14 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0xf01, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 15 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x1003, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 16 (id 21)
usb 1-5.4.1: input irq status -75 received
usbcore: registered new interface driver snd-usb-audio
ath10k_pci 0000:08:00.0: enabling device (0000 -> 0002)
usb 1-5.4.1: input irq status -75 received
usb 1-5.4.1: input irq status -75 received
ath10k_pci 0000:08:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
usb 1-5.4.1: input irq status -75 received
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
usb 1-5.4.1: input irq status -75 received
snd_hda_codec_ca0132 hdaudioC0D0: autoconfig for CA0132: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_ca0132 hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_ca0132 hdaudioC0D0: hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
snd_hda_codec_ca0132 hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_ca0132 hdaudioC0D0: dig-out=0xc/0x0
snd_hda_codec_ca0132 hdaudioC0D0: inputs:
snd_hda_codec_ca0132 hdaudioC0D0: Mic=0x12
snd_hda_codec_ca0132 hdaudioC0D0: Line=0x11
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x602, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 6 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x602, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 6 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x602, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 6 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x602, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 6 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x602, wIndex = 0x1500, type = 4
audit: type=1400 audit(1497542260.015:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=921 comm="apparmor_parser"
audit: type=1400 audit(1497542260.015:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=922 comm="apparmor_parser"
audit: type=1400 audit(1497542260.015:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=925 comm="apparmor_parser"
audit: type=1400 audit(1497542260.015:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=929 comm="apparmor_parser"
audit: type=1400 audit(1497542260.015:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=930 comm="apparmor_parser"
audit: type=1400 audit(1497542260.015:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=924 comm="apparmor_parser"
audit: type=1400 audit(1497542260.015:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=924 comm="apparmor_parser"
audit: type=1400 audit(1497542260.015:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=924 comm="apparmor_parser"
audit: type=1400 audit(1497542260.015:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=924 comm="apparmor_parser"
kauditd_printk_skb: 9 callbacks suppressed
audit: type=1400 audit(1497542260.019:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=936 comm="apparmor_parser"
audit: type=1400 audit(1497542260.019:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=938 comm="apparmor_parser"
audit: type=1400 audit(1497542260.019:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=937 comm="apparmor_parser"
audit: type=1400 audit(1497542260.019:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=937 comm="apparmor_parser"
audit: type=1400 audit(1497542260.019:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=937 comm="apparmor_parser"
audit: type=1400 audit(1497542260.019:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=940 comm="apparmor_parser"
audit: type=1400 audit(1497542260.019:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=934 comm="apparmor_parser"
audit: type=1400 audit(1497542260.019:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=934 comm="apparmor_parser"
audit: type=1400 audit(1497542260.019:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=934 comm="apparmor_parser"
audit: type=1400 audit(1497542260.019:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=934 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x602, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 6 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x602, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 6 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x602, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 6 (id 21)
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x602, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 6 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x602, wIndex = 0x1500, type = 4
ath10k_pci 0000:08:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:08:00.0.bin failed with error -2
ath10k_pci 0000:08:00.0: Direct firmware load for ath10k/cal-pci-0000:08:00.0.bin failed with error -2
ath10k_pci 0000:08:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
ath10k_pci 0000:08:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
ath10k_pci 0000:08:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
ath10k_pci 0000:08:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
ath10k_pci 0000:08:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
ath10k_pci 0000:08:00.0: board_file api 2 bmi_id N/A crc32 19644295
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input19
snd_hda_codec_ca0132 hdaudioC0D0: ca0132 DSP downloaded and running
input: HDA Intel PCH Front Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
ath10k_pci 0000:08:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
ath: EEPROM regdomain: 0x69
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x69
ath10k_pci 0000:08:00.0 wlp8s0: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
snd_hda_codec_ca0132 hdaudioC0D0: ca0132 DSP downloaded and running
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: cannot get ctl value: req = 0x83, wValue = 0x505, wIndex = 0x1500, type = 4
usb 1-9: 21:0: cannot get min/max values for control 5 (id 21)
usb 1-9: cannot get ctl value: req = 0x81, wValue = 0x505, wIndex = 0x1500, type = 4
retire_capture_urb: 7 callbacks suppressed
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
systemd[1]: motd-news.timer: Adding 46min 31.905198s random time.
systemd[1]: motd-news.timer: Adding 42min 21.659680s random time.
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
sd 7:0:0:0: [sde] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sde] tag#0 Sense Key : Not Ready [current]
sd 7:0:0:0: [sde] tag#0 Add. Sense: Medium not present
sd 7:0:0:0: [sde] tag#0 CDB: Read(10) 28 00 00 00 0a 00 00 02 00 00
blk_update_request: I/O error, dev sde, sector 2560
sd 7:0:0:0: [sde] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sde] tag#0 Sense Key : Not Ready [current]
sd 7:0:0:0: [sde] tag#0 Add. Sense: Medium not present
sd 7:0:0:0: [sde] tag#0 CDB: Read(10) 28 00 00 00 0a 00 00 00 08 00
blk_update_request: I/O error, dev sde, sector 2560
Buffer I/O error on dev sde1, logical block 64, async page read
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
Chrome_ChildThr[9339]: segfault at 0 ip 00007fc5ce0a558e sp 00007fc5cc1f9ba0 error 6 in libxul.so[7fc5cd3c6000+409a000]
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready